< img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=3484988&fmt=gif" />

Waste Heat-Type Concentrator

 | Shincci  Global

Drying Technology

 | Shincci  Global Drying Technology

中文

Waste Heat-Type Concentrator

We solution for:

Continuous evaporation concentration in industries pharmaceuticals, chemicals, bioengineering, environmental engineering.

Special to four-effect concentration technology with low temperature

SHINCCI for your satisfication:

Low temperature evaporation in range of 20~60 degrees 

Saves 75% energy comparing to one-effect evaporation.

Can effectively control discharge concentration

Live concentration monitoring control can realize automatic discharge.

Have the vacuum concentration technology:

Concentration of herb extraction

Concentration of juice extraction

Essential oil distillation for medical treatment

Get Free Quote
Email Us
  • General Process
  • Principle
  • Models

A large amount of feed liquid is intake by the concentrator machine under negative pressure, and a small amount of thickened liquid is discharged by pump after treatment; condensed water is forced out by the water pump.


 Energy Consumption Analysis&System Comparison

The production range of four- effect concentrator is between 7 and 200T/D.



① The one-effect feed liquid is heated by the heat source in vacuum and then boils and evaporates, and the low-temperature steam is cooled into condensate by the two-effect condenser and discharged outside the machine;

②After being concentrated by the one-effect evaporation, the feed liquid enters the two-effect evaporation chamber. The two-effect feed liquid is heated by the two-effect heater and then boils and evaporates. The low temperature steam is cooled into condensate by the three- effect condenser and discharged outside the machine;

③The feed liquid enters the three-effect evaporation chamber after being concentrated by the two-effect evaporation. The three-effect feed liquid is heated by the three-effect heater and then boils and evaporates. The low-temperature steam is cooled into condensate by the four-effect condenser and discharged outside the machine;
 

④ After concentration by three-effect evaporation, the feed liquid enters the four-effect evaporation chamber. The four-effect feed liquid is heated by the four-effect heater and then boils and evaporates. The low temperature steam is cooled into condensate water by the cooler and discharged outside the machine;

⑤ The cooling heat is discharged from the engine through the cooling system;

⑥ The feed liquid passes through one- effect, two- effect and three-effect. After multi-effect concentration, it is discharged outside the machine.


Write

PROJECT INFO

Sludge Type:
Dewatering Type:
DS Rate--for liquid sludge inlet to dewatering machine (Only needed when we are expected to offer dewatering machine):%
Inlet sludge: Tonne(s)/Day
Inlet moisture: %
Outlet moisture: %
Working hours:Hour(s)/Day